Contact Us

Display prices:

Select Your Country

browse inventory

Kinetica+ K4 Horizontal 3 Star Kitemarked Thumb Turn Euro Cylinder Door Locks

View full description

Kinetica+ K4 Horizontal 3 Star Kitemarked Thumb Turn Euro Cylinder Door Locks

Click here to see how to measure your cylinder

How to Measure a Euro Cylinder Lock

The easiest and most accurate way to measure a Euro cylinder is to use a cylinder gauge, which can be purchased here. However if you do not want to use to gauge, it is still possible to measure what size cylinder you need with a tape measure or ruler:

1. When you open your door, you will see the below:

how to measure a euro cylinder lock

The first thing to do is to locate the retaining screw (this is the screw that is keeping your current cylinder in place.)

2. If you are using a cylinder gauge, put the centre of the cylinder gauge (B) into the retaining screw hole on your door (there is no need to remove the retaining screw):

how to measure a euro cylinder lock

Adjust lever (A) and (C) on the gauge to the end of your door handle.

Do not measure what the existing cylinder is at it may be the wrong size and cause the cylinder to overhang, which makes it vulnerable to burglars.

3. On side A, read off the measurement (i.e. 45mm.) On side C, read off the measurement (i.e. 35mm.) Depending on which type of cylinder you want to use, it may only fit one way round, so make a note of which side is the external side (outside.) In this example, we will say that the external side is side A.

3A. If you are using a ruler or tape measure, measure from the centre of the retaining screw to the end of your handle on side A, and repeat with side C. Always round your measurements to the nearest 5mm, so if you get a measurement of 43mm round it up to 45mm, or if the measurement is 42mm round it down to 40mm.

4. You will now have 2 measurements: Side A = 45mm and Side C = 35mm. Adding these measurements together will give you an overall measurement of 80mm.

5. If you are planning on purchasing a key/key cylinder that can only be fitted one way round (for example the UAP 3* Kinetica cylinders) then the cylinder you need is a 80mm 35/45EX cylinder (the EX shows which side is external.) However if you are puchasing a cylinder that can be fitted either way round, you can purchase either 80mm 35/45 or a 80mm 45/35 cylinder (they are both exactly the same.)

5A. If you are planning on purchasing a thumb turn cylinder, it can only be fitted one way round with the thumb turn side being on the internal side (inside.) You would therefore need a cylinder which is a 80mm 35T/45 cylinder (the T shows which side the thumb turn goes on.)

Please note - you will see the cylinder options set out as Xmm X/X (X-10-X). For example, 80mm 35/45 (30-10-40). The X-10-X measurement is just another way that some people measure cylinders (they count the cam in the middle of the cylinder as 10mm and then deduct 5mm for each side.) However you do not need to take notice of this measurement when ordering.

£44.39 Incl. VAT

Product Code: MISC

View full description

Frequently bought together

On Sale

Red Triangle Universal Access Thumb Turn Grip
£5.99 ~~£8.51~~ Incl. VAT
+
UAP Extra Key Cut
£3.00 Incl. VAT
+
DUO 243mm Stainless Steel Door Handle (DDA/EA Compliant)
£31.14 Incl. VAT
1. Finish
Total Price

£40.12
Incl. VAT

Product Information
Quick Order

Product Information

Kinetica+ K4 Horizontal 3* Kitemarked Helix Thumb Turn Euro Cylinder Door Locks

__________________________________________
__________________________________________________

- Can be fitted in under 5 minutes with no skill necessary
- BSI 3* Kitemarked
- Secured by Design
- Sold Secure Diamond Standard
- Has a modern and sleek looking 'stadium' oval shaped thumb turn
- Thumb turn mechanism designed for the elderly, people with arthritis and limited hand movement
- Easy turn HELIX thumb turn system: offers no resistance when turning but still maintains all of the great security features of Kinetica
- Tested to EN1303:2015
- Supplied with 3 Bio Keys which have antibacterial and antiviral properties and have been tested to ISO 22196:2011 and ISO 21702: 2019
- Horizontal keyway
- Has 6 dimple pins and 5 laser track side pins
- Has an anti-snap line on the external cylinder side
- Patented anti-bump timing pin system
- Anti-pick pins
- Hardened steel anti-drill pins
- Unrestricted keyway makes it easier for customers to get keys cut
- Over 13 million+ different key combinations
-1 hour fire rated
-Patent applied for anti-tilt mechanism
-Does not use trap pins so no danger of cylinder entrapment
- Cylinder can be opened from the inside if attacked from the outside
- Part of the UAP £4,000 cylinder guarantee scheme
- Also available in a key / key version

__________________________________________________
__________________________________________

What are BSI 3* Kitemarked Cylinders?

The TS007:2012 BSI Kitemark is the security rating for door hardware and cylinders. The system has 3 ratings, starting at 1 and with 3 being the highest. 1 or 3 stars can be awarded to cylinders and 2 stars awarded to door hardware such as door handles or cylinder guards. For a cylinder to gain a 1 star rating is must pass the criteria set out on BS EN 1303:2005 but it does not pass snapping tests. 3 star Kitemarked cylinders pass both tests, proving to withstand 5 types of attack; drilling, picking, bumping, snapping and plug extraction. The TS007 3 star rating is the highest rating and considered the ultimate door security solution. However, installing a 3 star cylinder is not the only way to get this level of security. By installing a TS007 1 star cylinder with the backup of a TS007 2 star door hardware product you can also achieve 3 star security status.

Next time you change a lock, make it a game changing one.

Features a user-friendly easy turn Helix thumb turn which is smoother to turn and easier to grip. Unlike some other systems, it doesn’t just stop at security, it also helps to stop bacteria thanks to a thumb turn warm touch Bio Cap which has health-protecting qualities. The Bio keys and thumb turn cap have been tested to ISO 22196:2011standards and shown to reduce Staphylococcus aureus and Escherichia coli and have been tested to ISO 21702:2019 standards and shown to reduce SARS-COV-2.

New Horizontal Keyway

A new horizontal version of our industry leading Kinetica+ K4 3 star cylinder. As an additional security measure, the Kinetica+ K4 Horizontal cylinder has been designed to allow only single-orientation key insertion. This has enabled the in-house UAP design team to create a smaller keyway, making it even harder to attack. The new horizontal keyway has six dimple pins and five laser track side pins, creating the potential for over 13 million differs, and making the lock even more difficult to pick.

Part of the UAP Cylinder Registration Scheme

The UAP cylinder registration scheme gives you and your customers the guarantee that they will never forget to maintain their lock to keep its performance to a maximum.

The cylinder comes with a key fob which includes a QR code. Customers can register the cylinder on the UAP website to activate their registration and free maintenance updates. What’s more, customers will also have access to ‘My Keys.’ This allows the customer to keep a record of their key number and an image, so if they ever lost all of their keys, they can log in to the website and simply take the key number and image to a key cutter to get cut. This will save them the expense of having to replace their cylinder!

Kinetica+ K4 Horizontal 3 Star Kitemarked Thumb Turn Euro Cylinder Door Locks

Part of the UAP £4,000 Cylinder Guarantee Scheme

UAP offer up to a £4,000 cylinder guarantee on their 3* cylinders. The anti-burglar guarantee means that if a home gets broken into via the lock, and a UAP 3* cylinder installed, in the event that the insurance company won't pay out - UAP will consider a limited liability claim. Click here for more information.

Kinetica+ K4 Horizontal 3 Star Kitemarked Thumb Turn Euro Cylinder Door Locks

Technical Info

Most cylinders use a very clever and patented timing pin anti-bump system, designed by locksmith expert and Royal Navy engineer Chris Belcher. The patented timing pins are highly effective in interrupting the pins when bumped.

Anti–drill pins are in each side of the cylinder.

Anti–pick pins are in each side of the cylinder make it extremely difficult for a common burglar to pick the cylinder.

Please note we do not recommend using three star cylinders on doors fitted with pull handles. We do however recommend using one star cylinders with a cylinder guard on doors fitted with pull handles.

Quick Order