Contact Us

Display prices:

Select Your Country

browse inventory

Kinetica+ K4 3 Star Kitemarked Key / Key Euro Cylinder Door Locks

View full description

Loading 360° Product View

Tip: Hold mouse button and move around to rotate the 360° animation.

Kinetica+ K4 3 Star Kitemarked Key / Key Euro Cylinder Door Locks

Kinetica+ K4 3 Star Kitemarked Key / Key Euro Cylinder Door Locks

Click here to see how to measure your cylinder

How to Measure a Euro Cylinder Lock

The easiest and most accurate way to measure a Euro cylinder is to use a cylinder gauge, which can be purchased here. However if you do not want to use to gauge, it is still possible to measure what size cylinder you need with a tape measure or ruler:

1. When you open your door, you will see the below:

how to measure a euro cylinder lock

The first thing to do is to locate the retaining screw (this is the screw that is keeping your current cylinder in place.)

2. If you are using a cylinder gauge, put the centre of the cylinder gauge (B) into the retaining screw hole on your door (there is no need to remove the retaining screw):

how to measure a euro cylinder lock

Adjust lever (A) and (C) on the gauge to the end of your door handle.

Do not measure what the existing cylinder is at it may be the wrong size and cause the cylinder to overhang, which makes it vulnerable to burglars.

3. On side A, read off the measurement (i.e. 45mm.) On side C, read off the measurement (i.e. 35mm.) Depending on which type of cylinder you want to use, it may only fit one way round, so make a note of which side is the external side (outside.) In this example, we will say that the external side is side A.

3A. If you are using a ruler or tape measure, measure from the centre of the retaining screw to the end of your handle on side A, and repeat with side C. Always round your measurements to the nearest 5mm, so if you get a measurement of 43mm round it up to 45mm, or if the measurement is 42mm round it down to 40mm.

4. You will now have 2 measurements: Side A = 45mm and Side C = 35mm. Adding these measurements together will give you an overall measurement of 80mm.

5. If you are planning on purchasing a key/key cylinder that can only be fitted one way round (for example the UAP 3* Kinetica cylinders) then the cylinder you need is a 80mm 35/45EX cylinder (the EX shows which side is external.) However if you are puchasing a cylinder that can be fitted either way round, you can purchase either 80mm 35/45 or a 80mm 45/35 cylinder (they are both exactly the same.)

5A. If you are planning on purchasing a thumb turn cylinder, it can only be fitted one way round with the thumb turn side being on the internal side (inside.) You would therefore need a cylinder which is a 80mm 35T/45 cylinder (the T shows which side the thumb turn goes on.)

Please note - you will see the cylinder options set out as Xmm X/X (X-10-X). For example, 80mm 35/45 (30-10-40). The X-10-X measurement is just another way that some people measure cylinders (they count the cam in the middle of the cylinder as 10mm and then deduct 5mm for each side.) However you do not need to take notice of this measurement when ordering.

£32.39 Incl. VAT

Product Code: MISC

Kinetica+ K4 3 Star Kitemarked Key / Key Euro Cylinder Door Locks

View full description

Frequently bought together

UAP Extra Key Cut
£3.00 Incl. VAT
+
DUO 243mm Stainless Steel Door Handle (DDA/EA Compliant)
£22.82 Incl. VAT
1. Finish
+
On Sale

Pickbuster Lock Lubricant - 5 Lock Sachet Pack
£2.99 ~~£9.12~~ Incl. VAT
Total Price

£28.80
Incl. VAT

Product Information
Quick Order

Product Information

Kinetica+ K4 3* Kitemarked Key / Key Euro Cylinder Door Locks

__________________________________________
__________________________________________________

- Can be fitted in under 5 minutes with no skill necessary
- BSI 3* Kitemarked
- Secured by Design approved
- Tested to EN1303:2015
- Supplied with 3 Bio Keys which have antibacterial and antiviral properties and have been tested to ISO 22196:2011 and ISO 21702:2019
- Has 6 pins
- Part of the UAP cylinder registration scheme
- Has an anti-snap line on the external cylinder side (external side has EX in the code)
- Patented anti-bump timing pin system
- Anti-pick pins
- Hardened steel anti-drill pins
- Unrestricted keyway makes it easier for customers to get keys cut
- Over 200,000 different key combinations
-1 hour fire rated
-Does not use trap pins so no danger of cylinder entrapment
- Cylinder can be opened from the inside if attacked from the outside
- Patent applied for anti-tilt mechanism
-Also available in a thumb turn version

__________________________________________________
__________________________________________

What are BSI 3* Kitemarked Cylinders?

The TS007:2012 BSI Kitemark is the security rating for door hardware and cylinders. The system has 3 ratings, starting at 1 and with 3 being the highest. 1 or 3 stars can be awarded to cylinders and 2 stars awarded to door hardware such as door handles or cylinder guards. For a cylinder to gain a 1 star rating is must pass the criteria set out on BS EN 1303:2005 but it does not pass snapping tests. 3 star Kitemarked cylinders pass both tests, proving to withstand 5 types of attack; drilling, picking, bumping, snapping and plug extraction. The TS007 3 star rating is the highest rating and considered the ultimate door security solution. However, installing a 3 star cylinder is not the only way to get this level of security. By installing a TS007 1 star cylinder with the backup of a TS007 2 star door hardware product you can also achieve 3 star security status.

Next time you change a lock, make it a game changing one. With the multi-award winning, multi-patented safety features of the Fullex Kinetica+ K4. Thanks to its advanced technology and unrivalled built-in performance at every turn, it takes security, safety, hygiene and easy-fit functionality to a whole new level. At the heart of the cylinder's advanced defence capability lies an ingenious cam system that delivers a new kind of security. 3 Bio keys have antibacterial and antiviral properties. They have been tested to ISO 22196:2011 and shown to reduce Staphylococcus aureus and Escherichia coli. Also tested to ISO 21702:2019 and shown to reduce SARS-CoV-2, the virus that causes Covid-19, making it possible to lock and unlock the door with a greatly reduced risk of infection transfer to anyone in your family.

Part of the UAP Cylinder Registration Scheme

The UAP cylinder registration scheme gives you and your customers the guarantee that they will never forget to maintain their lock to keep its performance to a maximum.

The cylinder comes with a key fob which includes a QR code. Customers can register the cylinder on the UAP website to activate their registration and free maintenance updates. What’s more, customers will also have access to ‘My Keys.’ This allows the customer to keep a record of their key number and an image, so if they ever lost all of their keys, they can log in to the website and simply take the key number and image to a key cutter to get cut. This will save them the expense of having to replace their cylinder!

Technical Info

Most cylinders use a very clever and patented timing pin anti-bump system, designed by locksmith expert and Royal Navy engineer Chris Belcher. The patented timing pins are highly effective in interrupting the pins when bumped.

Anti–drill pins are in each side of the cylinder.

Anti–pick pins are in each side of the cylinder make it extremely difficult for a common burglar to pick the cylinder.

Please note we do not recommend using three star cylinders on doors fitted with pull handles. We do however recommend using one star cylinders with a cylinder guard on doors fitted with pull handles.

Quick Order